Request vCarve Pro

acerx3 · November 12th, 2008

I would like to request program from

http://www.vectric.com/

PLease !!

I have searched all P2P Sites, Torrents you name it i been there and i cant find ANY programs that are on that site. I have built a CNC machine msg me if you wana see it i will send you my Site link. So please if you can/ have any of thise programs especialy vCarve Pro, Please post me a link! PLEASE

kn0tty · November 13th, 2008

found it on torrents but no one seeding so no way to get it sorry...

acerx3 · November 13th, 2008

Thanks for trying. I have been searching for Months for vCarve pro and any program for that company but i was unable to find it. Strange!!!

**m1o1e1** · November 13th, 2008

not strange at all..
it's something that very few people would want, and even fewer would use, so the release groups haven't, and most likely won't, spend the time to even try to crack it..

**worldterror** · November 13th, 2008

Quote:

Originally Posted by m1o1e1

not strange at all..
it's something that very few people would want, and even fewer would use, so the release groups haven't, and most likely won't, spend the time to even try to crack it..

;

ofcourse why not "acerx3" go for an alternative to that.. think about it :-/

acerx3 · November 14th, 2008

This is what i just made with ArtCam 2008, Took me 1hour but my wood was small so the top was cut off. Also i was using 95* V bit so its a bit rough.
SO i want to try more stuff out like carving in wood so that is why i wanted vCarve pro so i can test stuff out.
I have other works, on my site but im just starting out.

mumbler · April 20th, 2009

Looks good

I'm after this too and have found rapidshare links which I'm looking into. If they work I'll let you know. First one didn't

dens · July 4th, 2009

Any luck on your searches Mumbler?

mumbler · September 18th, 2009

No joy I'm afraid

dens · October 3rd, 2009

Anyone had any luck yet?

November 12th, 2008	#1
acerx3 Offline
Join Date: Nov 2008 Rank: Active Member Posts: 48	vCarve Pro I would like to request program from http://www.vectric.com/ PLease !! I have searched all P2P Sites, Torrents you name it i been there and i cant find ANY programs that are on that site. I have built a CNC machine msg me if you wana see it i will send you my Site link. So please if you can/ have any of thise programs especialy vCarve Pro, Please post me a link! PLEASE

November 13th, 2008	#2
kn0tty Offline
Join Date: Dec 2007 Rank: Posts: 337 Total Awards: 1	found it on torrents but no one seeding so no way to get it sorry...

November 13th, 2008	#3
acerx3 Offline
Join Date: Nov 2008 Rank: Active Member Posts: 48	Thanks for trying. I have been searching for Months for vCarve pro and any program for that company but i was unable to find it. Strange!!!

November 13th, 2008	#4
m1o1e1 (Old Fart \|\| Spam Hunter ) Offline
Join Date: Jan 2007 Rank: Administrator Posts: 9,163 Total Awards: 15	not strange at all.. it's something that very few people would want, and even fewer would use, so the release groups haven't, and most likely won't, spend the time to even try to crack it.. Trial Moderator Applicants Click Here >> PM m1o1e1 or phillia to Join << Learn More About MD Upload Team Click Here To Join Our Upload Team Today Don't Forget To Click My Button.. Mechodownload Works best on

November 14th, 2008	#6
acerx3 Offline
Join Date: Nov 2008 Rank: Active Member Posts: 48	This is what i just made with ArtCam 2008, Took me 1hour but my wood was small so the top was cut off. Also i was using 95* V bit so its a bit rough. SO i want to try more stuff out like carving in wood so that is why i wanted vCarve pro so i can test stuff out. I have other works, on my site but im just starting out.

April 20th, 2009	#7
mumbler Offline
Join Date: Dec 2008 Rank: Active Member Posts: 66	Looks good I'm after this too and have found rapidshare links which I'm looking into. If they work I'll let you know. First one didn't

July 4th, 2009	#8
dens Offline
Join Date: May 2009 Rank: Verified Member Posts: 21	Any luck on your searches Mumbler?

September 18th, 2009	#9
mumbler Offline
Join Date: Dec 2008 Rank: Active Member Posts: 66	No joy I'm afraid

October 3rd, 2009	#10
dens Offline
Join Date: May 2009 Rank: Verified Member Posts: 21	Anyone had any luck yet?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)